Transformer – Areton

Transformers Specifications

We require the following transformers:

Three Autotransformers at the specified Power ratings as per drawings: 10Watts,30 Watts and 50 Watts. Total 3 types.

three Transformers at the specified Power ratings as per drawings: 10Watts,30 Watts and 50 Watts

Total 3 types

We need 4 Transformers per sample type for our testings. We have 6 sample types as seen above

Variable Frequency From 50 KHz to 5 MHz

All the transformers have to be operational from 50 Khz to 5MHz continuously. The input is a AC sine wave at variable frequency from 50KHz up to 5 MHz continously. The output will be a step up of the input at the same frequency. IF you are aboe to reach 10 MHz let us know as the higher the frequncy the better.

The transformer has no dimension restrictions or any shape restriction, so you can manufacture them using the minimum dimensions you see fit

In the drawings you have the input voltage and the respective output voltages.

We will be grateful if you could please provide quotations for production of these transformers and samples for us to test in advance.

Summary:

Step up Transformers with no restrictions in sizes. You decide the size.
Input a AC frequency variable Wave from 50 KHz to 5 MHz. If you can we will be happy to have a transformer which can reach 10 MHz.
Power Ratings. 10Watts,30 Watts and 50 Watts. Three separate Transformers. For example 1 sample as per specifications below with overall power of 10 Watts. Another Transformer as per specifications below at total power of 30 Watts. Another Transformer as per specifications below at total power of 50 Watts. The current at the secondary is determined by the overall power of the transformer.
Step Up from 12 Volts up to 1000Volts , 1500Volt and 2000Volts with different tappings as shown in the drawings.

We have no sample, this is a new type of transformer. You decide the windings, pin arrangements etc.

You base your design on our circuit diagram as below.

If you have any question you can contact us thorough:

http://areton-ltd.com/contact/

The One below is the configuration for one transformer with one input and different tappings.